+
  • 190.jpg
  • 191.jpg

SOC-DIP-RG2420P

Shenou POE Ethernet switches provide DC power required by network terminal equipment through existing Ethernet twisted-pair cables without changing the original network architecture.

Classification:

4 ports POE

8 ports POE

POE switch

Model:

1048286537759678464

keyword:

ethernet switch

data transmission

Switch, communication and transmission products


Message
  • 产品描述
  • 功能特点
  • 技术参数
  • 方案图
  • 资料下载
    • Commodity name: SOC-DIP-RG2420P
    • Commodity ID: 1048286537759678464

    Shenou POE Ethernet switches provide DC power required by network terminal equipment through existing Ethernet twisted-pair cables without changing the original network architecture.

    Shenou POE Ethernet switches provide DC power required by network terminal equipment through existing Ethernet twisted-pair cables without changing the original network architecture. It supports international standard protocols, and can automatically detect and supply power to powered devices that comply with IEEE802.3af/at standards, such as wireless APs, network cameras, IP phones, handheld computers and other terminal devices. This series of products can also provide ultra-long-distance data transmission and power supply capabilities, with a distance of up to 250 meters. It adopts the international famous brand chip solution, which is stable and reliable; when the port is not connected, it will automatically enter the standby mode, which saves energy and is green and environmentally friendly; the port lightning protection design increases the anti-surge performance of the product.

    Key words:
    • ethernet switch
    • data transmission
  • ◆Support power supply for network cameras, wireless APs and other devices through Cat5e or above network cables
    ◆Support power supply for IEEE802.3af/at standard PD equipment
    ◆ Ultra-long distance data and power transmission, up to 100 meters
    ◆ Support full port IEEE802.3af power supply
    ◆ Dual-fan heat dissipation design and independent power supply design ensure the stability of the device
    ◆ PSE power supply modularization, easy installation, plug and play
    ◆ Intelligent power supply and management, support PoE status display, PoE setting, PoE event statistics, PoE power supply delay, PoE scheduling, PoE automatic detection and NTP setting, etc.
    ◆ Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3az standards

  • Device model

    SOC-DIP-RG2420P

    100M/1000M POE

    24

    100M/1000M uplink

    2*SFP

    Save and Forward

    Support

    Exchange content

    56G

    MAC address table

    8K

    Environment

    Working temperature: 0℃~40℃
    Storage temperature: -40℃~70℃"
    Working temperature: 10%~90% RH non-condensing
    Storage temperature: 5%~90% RH non-condensing"

    POE standard

    Standard IEEE802.3af/at single port maximum power 30W

    Input Power

    AC 100-240V 50/60Hz 1.0A Maximum power 400W

    Standard protocols supported

    IEEE802.3 Ethernet Media Access Control Protocol
    IEEE802.3i 10BASE-T Ethernet
    IEEE802.3u 1--BASE-TX Fast Ethernet IEEE802.3ab 1000BASE-T Gigabit Ethernet IEEE802.3z 1000BASE-X Gigabit Ethernet (fiber) 
    IEEE802.3af/at Power over Ethernet data line or device to power video Ethernet devices
    IEEE802.3x flow control

    System mode

    Standard sharing/VLAN isolation/ultra-distance 250-meter transmission (switch function selection)

    Data transfer rate

    Ethernet 10Mbps half duplex, 20Mbps full duplex
    Fast Ethernet 100Mbps half duplex, 200Mbps full duplex Gigabit Ethernet 2000Mpbs full duplex

    Network Media

    10Base-T: 2 to 3 categories (Cat3) or above UTP/STP (≤250M)
    100Base-TX: 2 pairs of Category 5 (Cat5) or above UTP/STP (≤150M)
    1000Base-T: 4 pairs of Cat5e or above UTP/STP(≤150M)

    Logistics specification

    Product size: 440mm*290mm*45mm(L*W*H)

     

  •  

Detail

Shenou POE Ethernet switches provide DC power required by network terminal equipment through existing Ethernet twisted-pair cables without changing the original network architecture. It supports international standard protocols, and can automatically detect and supply power to powered devices that comply with IEEE802.3af/at standards, such as wireless APs, network cameras, IP phones, handheld computers and other terminal devices. This series of products can also provide ultra-long-distance data transmission and power supply capabilities, with a distance of up to 250 meters. It adopts the international famous brand chip solution, which is stable and reliable; when the port is not connected, it will automatically enter the standby mode, which saves energy and is green and environmentally friendly; the port lightning protection design increases the anti-surge performance of the product.

previous page

next page

previous page

next page

Related products

Message

Submit