SOC8000-T Tandem Exchange
Brief Introduction
SOC8000-T TANDEM EXCHANGE is a telecom level QoS tandem exchange for telecom operator. SOC8000-T merges signal gateway & media gateway features into one unit, the result is make it not only with traditional PSTN signal tandem features, but also with IP network media tandem features.
SOC8000-T was designed base on NGN (Next Generation Network) platform, it can be installed between PSTN & IP network as trunk gateway also.
Main Features:
■ Stronger stability & reliability
-- MCU (main control unit) warm backup
-- Dual power supply backup
-- Hot-plugging or hot swap
-- Multi-level link backup
-- Power management system with telecom level QoS.
-- Intelligent route
■ Stronger billing system
-- Supports billing & CDR output
-- Transit billing for all calls
-- Big capability for saving bills (2-16 million bills) in FLASH memory
-- Build-in billing system dependently
-- Multi-type phone charge rate
-- Multi-type bills format (mdb, binary, txt, exl)
■ Traffic statistics
■ Networking management
-- Status & capability management
-- Configuration management
-- Service management
-- Strategy management
■ Security management
-- Multi-level identity access
-- Viewing system run temperature
-- Viewing system work voltage
-- Viewing link status
-- Viewing boards units status
■ Value-added service
-- IVR
-- Color ring
-- Vedio conversation
-- Conference call
--Multi-type language version for voice mail
Technical Parameters：
|
Characteristic index |
|
|
Trunk capacity |
Maximum supports 64E1 (SS7,PRI,R2 or VOIP) |
|
Ethernet interface |
10/100M Base-T Ethernet interface, RJ-45 interface |
|
Digital interface |
E1 ports, RJ-45 (120 Ohm) or BNC (75 Ohm) |
|
Business supports |
|
|
Voice |
Supports PSTN to PSTN, PSTN to IP, IP to IP connecting |
|
Fax |
Supports T.30, T.38 and VBD transparent transmission |
|
Dial up access internet |
Supports |
|
DTMF |
According to RFC2833 standard |
|
Route configuration |
Maximum supports 4096 route list configuration |
|
Charge function |
Built-in billing system & CDR output |
|
Protocol |
|
|
Signal protocol |
SS7 (TUP/ISU-P), PRI, R2 and QSIG |
|
Internet protocol |
SIP, MGCP, UDP and RTP/RTCP |
|
Voice |
G.711, G.729a, G.723 etc multi-type coding Echo suppression, RTP redundany packet shaping, dynamic jetting buffer, silence detection, plus adjustment. |
|
Network management & maintenance |
|
|
Local series port access |
Supports data configuration, status viewing, data backup/restore, software update, signaling tracking through RS232 interface. |
|
On-line diagnosis |
Supports diagnosis detection, fault loading, system clock and temperature detection |
|
Base WEB maintenance |
Supports local & remote configure data and update system software, backup configuration data also. |
|
Centralized Maintenance |
Friendly interface and provides configuration, alarm, charge, capability, security, log (system log, operation log security log) function. |
|
Physical characteristic |
|
|
Measure |
19 inch 5U (450mm×300mm×215mm) |
|
Power supply |
220V(AC) or -48V (DC) |
|
Work temperature |
0-45℃ |
|
Relative humidity |
5%-90% |
Application：
1. Convergence tandem exchange
2. Connects PSTN and IP Network
3. Improving communication network , save the 2M souce
Shenou - Your Partner in Business Communications
The customers’ profit is always our highest priority. Our products and services open up new business opportunities for you and help you optimize processes. We will combine with your present systems to protect your investments.
Our solutions make communication more cost-effective and contribute to a faster return on investment.
For more detail technical supports, please contact with us.
Service Hotline:4001 700 700
Webpage Copyright ©Shenou communication equipment Co.Ltd 浙ICP备05067306号 www.300.cn